teamviewer quick support not working on 4g

TEAMVIEWER QUICK SUPPORT NOT WORKING ON 4G DRIVERS
TEAMVIEWER QUICK SUPPORT NOT WORKING ON 4G DRIVER

This allows the modem firmware to select the available network. Initially the modem is set to the default auto mode. The RAP controls the cellular network service selection based on an Received Signal Strength Indication (RSSI) threshold-based approach. In this mode, the modem firmware will control the cellular network service selection so the cellular network service failover and fallback is not interrupted by the remote AP (RAP). Table 1: Cellular Network Preference Parameters Parameter Under USB Settings, select the USB Parameters check box.Ĭlick the Device drop-down list and select a USB modem device.Ĭlick the Cellular NW Preferences drop-down list and select one of the following provisioning options. Navigate to the Configuration > Wireless > AP Installation page. You can use the WebUI or CLI to provision the USB parameters. To enable 3G/4G network support, you must provision the RAP with the USB parameters on the controller.

TEAMVIEWER QUICK SUPPORT NOT WORKING ON 4G DRIVERS

Starting with ArubaOS 6.3, you can configure drivers for both a 3G or a 4G modem using the USB field, and the 4G USB Type field is deprecated.

TEAMVIEWER QUICK SUPPORT NOT WORKING ON 4G DRIVER

The modem configuration procedure in ArubaOS 6.2.0.x and earlier versions required that you define a driver for a 3G modem in the USB modem field under the AP provisioning profile, or define a driver for a 4G modem in the 4G USB type field. These changes simplify modem provisioning for both 3G and 4G networks. The 4G-WiMAX family of modems do not support the 3G-4G network switch-over functionality.ĪrubaOS 6.3 includes a new method of provisioning a multimode USB modems (such as a Verizon UML290, Verizon MC551L, or AT&T 313u) for a remote AP. The latest version allows the RAP to lock the modem in a particular network mode (for example, 3G only). Using a lower version of the firmware auto-selects the network mode based on the network availability. When a RAP connects to a 4G network, it appears as a Remote AP (R) and Cellular (C) on the controller.įor a 3G/4G network switch, it is recommended to use the UML290 modem with the firmware version L0290VWB522F.242 or later. You must provision a RAP with the 4G USB parameters on the controller manually based on its type and family (4G-WiMAX/4G-LTE). RAP does not support dynamic plug-and-play for the 4G USB modems. 4G USB Modem Provisioning Best Practices and Exceptions  It is recommended that you provision the USB modems for the RAP based on your network requirements. You can also configure the RAP to work exclusively on a 3G or 4G network. 4G takes precedence over 3G when the RAP tries to auto-select the network. This enables the RAP to choose the available network automatically. You can also provision the RAP to support both 4G and 3G USB modems. TIP: If you have a limited data plan, please ensure you are closing the application fully to reduce data usage.Provisioning 4G USB Modems on Remote Access Points Provisioning 4G USB Modems on Remote Access PointsĪrubaOS provides support for 4G network by allowing you to provision 4G USB modems on the RAP. If you are using a device ID through your mobile plan, set up a Dynamic Domain Name System (DDNS) to eliminate the need to pass through the Stratus / FLIR Cloud servers.If you cannot connect to your cameras using an LTE or IPv6 connection, switch to a 3G connection.Configure a lower substream video resolution in your DVR / NVR settings to reduce mobile data usage and increase your connection speed.Check with your mobile data service provider to confirm if they allow streaming of constant information over their network.To resolve your connection through a mobile data plan: If you are experiencing difficulties connecting to your cameras using a mobile data plan, check with your mobile data service provider, device ID, or mobile network. If you are using a 3G, 4G, or LTE mobile data plan instead of a WiFi connection, you may experience a slower connection or connection problems and higher data usage. You can connect to your cameras remotely with a smartphone or tablet by using a mobile data plan or WiFi connection.

Teamviewer quick support not working on 4g